Abstract
In this paper, a new kind of printed TEM horn antenna with high-gain fed by balanced microstrip line is proposed. The radiation part of the antenna (printed on the FR4 epoxy substrate) is composed of two symmetrical triangular metal foil branches fed by balanced microstrip line. The antenna has been simulated by CST MICROWAVE STUDIO r software and the simulated results show that the proposed antenna is a kind of traveling wave antenna. Besides, an equivalent adopted V-shaped antenna model is proposed to describe the radiation characteristic of the antenna. The simulated and measured results indicate that in the frequency ranging from 1.64GHz to 9GHz, the re∞ection coe-cient of the antenna is less than i6dB and in the work frequency band, the average gain value is over 8.2dB. The antenna gain will be improved greatly by extending the length of the dielectric slab appropriately (in the main radiation direction) without in∞uencing the bandwidth. The measured and simulated results have a good consistency. This antenna will have wide application in the UWB fleld.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
