Abstract
Polypropylene (PP) is a promising material for extrusion-based additive manufacturing due to its low cost, chemical resistance, good mechanical properties, versatile, and can be applied in various industrial applications. Recent research has focused on addressing the warpage issue in 3D printing of PP filaments. The effect of environmental conditions and loading of nanoprecipitated calcium carbonate (NPCC) in the pristine polypropylene to decrease warpage using the Fused Deposition Modelling (FDM) printing technology was studied. PP-NPCC composite filaments containing 5, 10, and 15 NPCC (wt%) were prepared using the twin-screw extruder. The printability, physicochemical, and mechanical properties of the PP-NPCC blends were determined. Based on the results, the incorporation of NPCC has contributed to the improvement of 3D printability and warpage in the PP-NPCC composite. At controlled environmental conditions, the filament was printable and the warpage was decreased by 44% at 10% NPCC loading. At the same concentration, there was a 30% increase in compressive strength and 43% increase in elastic modulus of the 3D printed parts.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
