Abstract
Primary side regulation (PSR) technology has the characteristics of lower cost and standby power losses. However, there is no algorithm suitable for discontinuous conduction mode (DCM) and continuous conduction mode (CCM) operations of primary side control for flyback converter because of the difficulty in estimating the output voltage correctly. In this paper, a PSR control algorithm suitable for DCM/CCM flyback converter is proposed and implemented with digital micro controller. The voltage drop on the secondary winding and output diode at CCM operation is compensated by sensing the secondary side current at the instant when primary side switch is being turned-on. The secondary side current is zero at the voltage sensing instant and equal to the current at the instant when primary side switch is being turned-on as flyback operated at DCM. In addition, the proposed algorithm can be used to regulate either the output voltage or current very well. An experimental prototype with 150 W rated power is built to verify the feasibility of the proposed control. Experimental results show that the output voltage can be controlled with error less than 0.25%, and the output current error is less than 5%. The conversion efficiency is up to 92.8%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
