Abstract
The ISO 52000–1:2017 is the overarching Energy Performance of Buildings (EPB) standard, providing the general framework of the EPB assessment. It is applicable to the assessment of overall energy use of a building, by measurement or calculation, and the calculation of energy performance in terms of primary energy or other energy-related metrics. ISO 52000–1 provides general profound guidelines, but also gives the freedom to adapt the guidelines with national standards and regulations. This article focuses on design stage energy performance assessment in the framework of syn.ikia project, which aims to deliver a blueprint for an Integrated Design Process of sustainable plus energy buildings and neighbourhoods, leading the way to plus energy districts and cities. This project has four demonstration sites and the one being in focus of this article is located in Catalonia, Spain. Even though this project and Spanish Technical code both are based on ISO 52000–1, the criteria of calculation boundaries of those two vary in some degree, and that can cause great difference in the primary energy balance. In the calculation of the energy balance the criteria of syn.ikia considers all common energy uses in a building, including heating, cooling, ventilation, dehumidification, domestic hot water and lighting, while the Spanish Technical Code excludes lighting consumption. The main difference however is caused due to the fact that in syn.ikia hypothesis the exported energy is being considered in the calculation of how much non-renewable energy is avoided from the grid, while Spanish Technical Code excludes it. For the evaluation of these differences, a simplified monthly primary energy calculation tool is developed during the evaluation framework of key performance indicators of the project. The analysis of the calculation framework hypothesis is presented, analyzing the effects of the assessment boundaries, different primary energy balance calculation hypothesis and building design alternatives.
Highlights
Primary Energy consumption is used as one of the main indicators for the assessment of the energy balance in the Energy Performance of Building Directive (EPBD) and adopted in most of the countries in Europe
This article focuses on design stage energy performance assessment in the framework of syn.ikia project, which aims to deliver a blueprint for an Integrated Design Process of sustainable plus energy buildings and neighbourhoods, leading the way to plus energy districts and cities
Even though this project and Spanish Technical code both are based on ISO 52000-1, the criteria of calculation boundaries of those two vary in some degree, and that can cause great difference in the primary energy balance
Summary
Primary Energy consumption is used as one of the main indicators for the assessment of the energy balance in the Energy Performance of Building Directive (EPBD) and adopted in most of the countries in Europe. The renewable energy consumed in a PEB must mainly be produced on-site. On-site refers to energy sources that are in, on, under, or adjacent to the building. As a rule of thumb, the generation of energy must take place within the perimeter of the development, property, in a closed grid, or within a specific distance from the perimeter of the building. Electricity generated by dedicated renewable energy systems in the region, as well as biomass which is supplied, is not necessarily regarded as an import
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have