Abstract
Publisher Summary This chapter discusses the pretreatment of coals with supercritical solvents under coal liquefaction conditions. In a study described in the chapter, sample coals were dried in an atmosphere of nitrogen, were ground to pass 200 Tyler mesh, and were slurried with a large amount of the concerned solvent. Most of the experiment was carried out at temperatures of 400°C under high pressures of 20, 40, and 60 MPa using a self-made tubular-type reactor. The products were recovered and divided into low-boiling fractions as a distilled solvent and a high-boiling fraction as residue. This was accompanied using a vacuum distillation until the distillates were no longer detectable. The high-boiling fraction was further fractionated into hexane-soluble, benzene-soluble, tetrahydrofuran-soluble materials, and unreacted residue. In tetralin, the coal conversion gradually increased up to 100 daf %; the pretreatment profiles were similar with those of usual coal hydroliquefaction profiles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: 1991 International Conference on Coal Science Proceedings
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.