Abstract
Abstract In this paper, the removal of arsenic from arsenic-bearing gold ore through air oxidation and sodium hydroxide leaching with microwave irradiation was studied. Firstly, single-factor experiments were carried out. The results indicated that the removal rate of arsenic was influenced by the sodium hydroxide concentration, ratio of liquid to solid, microwave power, and reaction time. Then, orthogonal experiments were done to determine the main influencing factors. The results obtained from the experiments of orthogonal arrays showed that reaction time and microwave power were the important influencing factors, and the optimum conditions of sodium hydroxide concentration, reaction time, microwave power, and ratio of liquid to solid were 18 wt.%, 60 min, 700 W, and 5, respectively. Under the optimal conditions, the removal of arsenic could reach approximately 81.46 wt.% and, at the same conditions, the sulfur removal rate was about 55.56 wt.%. The results of X-ray diffraction analysis revealed that AsS and FeAsS were decomposed during the leaching process, while FeS2 was not.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
