Abstract
Dissolved organic matter and scaling are the main causes of electrode fouling, blocking activated carbon pores and reducing their performance. However, limited information exists on fouling by low molecular weight organic matter in the capacitive deionization (CDI) process. This study therefore systematically investigated for the first time a pretreatment process to prevent the accumulation of organic and inorganic matter as well as scaling in the CDI process. During various pretreatments, activated filter media and granule activated carbon were considered promising for drinking water treatment. The higher the turbidity and organic matter concentration in the CDI feed solution was, the greater the reduction of salt removal efficiency, production rate, and energy consumption became. Divalent ions, such as Ca2+, had no noticeable effect on CDI treatment performance because of the neutralization effect of the dispersant, whereas iron had a noticeable effect on CDI electrode fouling. The results of this study are foreseen to help minimize its negative impact by reducing organic matter fouling and enabling water reuse.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
