Abstract
This paper presents an application of prestressed carbon fiber-reinforced polymer (CFRP) plates for the strengthening of metallic girders of a roadway bridge in Melbourne, Australia. The study also describes the application of a wireless sensor network (WSN) system for long-term structural monitoring of the retrofitted bridge girders. A flat prestressed unbonded retrofit (FPUR) system was developed to apply prestressed CFRP plates to the steel girders of the Diamond Creek Bridge (122 years old), which is subjected to daily passenger and heavy vehicles. The first section explains the results of sets of static and fatigue tests performed in the laboratory to examine the efficiency of the proposed FPUR system prior to its installation on the bridge. The second section presents details of different aspects of the CFRP strengthening of the bridge girders, fatigue design criteria, and layouts for short- and long-term monitoring. For the short-term measurements, the bridge was loaded with a 42.5-ton semi-trailer before and after strengthening. The CFRP plates were prestressed up to approximately 980 MPa (≈38% of the CFRP ultimate tensile strength), which resulted in about 50% reduction in the maximum tensile stress in the bridge girders. The third section discusses the development, installation, and preliminary results of the WSN system used to monitor the pre-stress level in the CFRP plates. The results of the short- and long-term measurements in this study show that the FPUR system is very effective for flexural and fatigue strengthening of bridge girders. Finally, a set of recommendations for long-term structural monitoring is provided.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.