Abstract
Pressure-driven flows through optically transparent polydimethylsiloxane (PDMS) microfluidic channels using a syringe pump are common in many experimental applications. However, because of small changes, the pressure-induced deformations due to soft materials and shapes and patterns in the microchannels, which generate untargeted flow velocity and pressure drop, have been easily ignored. In this paper, we present a simple experimental investigation with circular-shaped, periodically arranged objects of three different characteristic dimensions, as well as various channel heights ranging from 15 μm to 200 μm. The resultant CCD images and pressure data were used to determine the extent of the start-up transients and evaluate the establishment of quasi-steady flow conditions. Channel deformation, measured by fluorescence intensity difference, was severe in shallow microchannels that had characteristically large obstacles. In addition, PDMS microchannel bulging effects in shallow microchannels exerted a greater deleterious effect on (ΔP/Δx)QS values than upon VQS for the experiments using a volumetrically controlled syringe pump. The discrepancy between experimental and theoretical (ΔP/Δx) increased with decreasing microchannel height. This means that the severe PDMS bulging observed in shallow microchannels using a syringe pump can generate large deviations from the desired experimental result. As a result, the slope of Darcy friction factors plotted against the Reynolds number indicates that the slope was strongly dependent on microfluidic channel height and the degree of PDMS bulging. The microfluidic channel with the greatest height exhibited the smallest bulging effect and was shown to be in relatively good agreement with predicted values, while the slope became much steeper than −1 as channel heights decreased.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
