Pressure Model Study on Synchronous Grouting in Shield Tunnels Considering the Temporal Variation in Grout Viscosity

Abstract

The grout pressure in the shield tunnel tail void during synchronous grouting is the key to controlling ground settlement and restraining the segment. However, the circumferential, longitudinal, and radial distribution of grout pressure considering the temporal variation in grout viscosity has not been well explored yet. In this study, a theoretical model of grout pressure distribution and dissipation considering the temporal variation in Bingham grout viscosity was established. The simulation results of the pressure model were verified by field-measured data. The results showed that the radial and longitudinal distributions of grout pressure considering the temporal variation in grout viscosity were closer to the field-measured data. The impacts of the main parameters on the pressure distribution and dissipation were analyzed. Compared with the effect of the shield tail void thickness, tunnel radius and yield shear stress have greater effects on grout pressure during the circumferential filling phase. During the longitudinal and radial diffusion phases, the increase in soil porosity and permeability coefficient was conducive to grout diffusion. The increase in the grout viscosity reduces the pressure loss during the grout flow process. The results of this research can provide a theoretical basis for the grout design process in shield tunnels.