Abstract
The effects of the volume fraction and length of natural fibers on flexural properties of biodegradable composites were investigated. Kenaf and bagasse were mixed with corn-starch biodegradable resin, and composite flexural specimens were fabricated by press forming. Cox's model that incorporates the effect of fiber compression in the cross section was applied to calculate the flexural modulus. Bagasse was found to be more compressible than kenaf due to the difference structure in the cross section. For up to 60% volume fraction kenaf and 66% bagasse composites, the flexural modulus increased with increase in fiber volume fraction, and these results were in good agreement with the calculated values. However, above 60% fiber volume fraction kenaf and 66% bagasse, the flexural modulus decreased due to insufficient resin. Moreover, the decrease of the flexural modulus occurred at fiber lengths 2.8 mm kenaf and 3.2 mm bagasse. Above these fiber lengths, there was no change in the flexural modulus of the composite specimens. This trend was also identified by the calculation.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
