Abstract

Titanium nitride ultrafine powders were prepared from tetrabutyl titanate and sucrose by sol–gel and microwave carbothermal reduction methods. The influences of reaction temperature, molar ratio of Ti to C, addition of crystal seeds and amount of NH 4F on the synthesis of titanium nitride were studied. The results show that excess amount of carbon, addition of crystal seeds and NH 4F plays a positive effect on the preparation of TiN at low temperature. The inceptive formation temperature of TiN ultrafine powders is about 800 °C, and pure TiN can be prepared at 1000 °C. Field emission-scanning electron microscopy (FE-SEM) was used to get the micrograph of the TiN powder, it shows that the size of the powders synthesized at 1000 °C is about 0.1–0.5 μm.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.