Abstract

ABSTRACT Uniform-sized amorphous hydrous titania particles (HTPs) with nonporous or porous surface were prepared and subjected to hot-water or hydrothermal treatment to induce crystallisation of the titania phase for preparing porous titania particles with high specific surface area (SSA) and outer diameter in a micron order. Porous HTPs were crystallised under milder treatment conditions than those required to crystallise nonporous spherical HTPs. This difference was attributed to the difference in the polycondensation states of hydrous titania. The SSA of the porous titania particles crystallised by hot-water treatment at 80°C for 24 h was 216 m2 g−1, despite their micron-order particle size. This simple method can synthesise highly functional titania particles at low temperatures and is a general-purpose method for preparing porous particles for use as adsorbents, catalysts and catalyst supports.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.