Abstract
In this investigation, nanocomposite films were fabricated by dispersion of poly(amide–imide)/CuO nanocomposites as nanofiller in the poly(vinyl alcohol) matrix via an ultrasonic process. The nanofiller was prepared and mixed with PVA matrix. After dispersion of nanofiller into the poly(vinyl alcohol), the mechanical properties of the nanocomposites were improved. For example, the addition of 6 wt% nanofiller into the poly(vinyl alcohol) matrix enhanced the tensile modulus by 39%. The residual weight at 800°C was 7% for pure poly(vinyl alcohol) while the nanocomposites illustrated 12–19% residue at this temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
