Abstract
AbstractAn in situ polymerization was conducted in the presence of expanded graphite obtained by rapid heating of the graphite intercalation compound (GIC) to form a polymer/expanded graphite conducting composite. Study showed that the graphite was dispersed in the form of nanosheets in the polymer matrix. The transition from an electrical insulator to an electrical semiconductor for the composite occurred when the expanded graphite content was 1.8 wt %, which was much lower than that of conventional conducting polymer composite. The composite exhibited high electrical conductivity of 10−2 S/cm when the graphite content was 3.0 wt %. This great improvement of conductivity could be attributed to the high aspect ratio (width‐to‐thickness) of the graphite nanosheets. Study suggested that extensive rolling of the blend greatly affected the conductivity of the composite. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2506–2513, 2001
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.