Abstract
Poly(lactic-co-glycolic acid) (PLGA)/multi-walled carbon nanotube (MWCNT) composite nanofibers have been successfully fabricated via airflow bubble-spinning. In this work, a systematic study of the effects of solution concentration, relative humidity (RH), and composition on the morphology of PLGA nanofibers is reported. By comparing the distribution of fiber diameter, we found that the spinning effect was the best when the temperature was kept at 25 °C, the collecting distance 18 cm, the concentration 8 wt %, and the relative humidity 65%. MWCNTs used as added nanoparticles were incorporated into the PLGA nanofibers. The volatile solvents were used to achieve the purpose of producing nanoporous fibers. Besides, the rheological properties of solutions were studied and the PLGA or PLGA/MWCNT composite nanofibers with a nanoporous structure were also completely characterized using scanning electron microscope (SEM), a thermogravimetric analyzer(TGA), X-ray diffraction(XRD) and Fourier-transform infrared (FTIR) spectroscopy. In addition, we compared the mechanical properties of the fibers. It was found that the addition of MWCNTs significantly enhanced the tensile strength and elasticity of composite nanofibers without compromising the nanoporous morphology. The results showed that the breaking strength of the composite fiber bundle was three times as strong as the pure one, and the elongation at the break was twice as great. This work provided a novel technique successfully not only to get rid of the potential safety hazards caused by unexpected static but also prepare oriented nanoporous fibers, which would demonstrate an impressive prospect for the fields of adsorption and filtration.
Highlights
Electrospinning has been recognized as the best simple and efficient technique for the production of polymer nanofibers
Due to the high surface area, high surface activity and high surface energy, electrospun nanofibers can be used in a wide variety of applications such as nonwoven fabrics [1], sensorics [2], photonics [3], filtration [4], composites [5], wound dressing [6], tissue engineering [7], fuel cells [8] and so on
Effect of Multi-walled carbon nanotubes (MWCNTs) on the Structure and Properties of Poly(lactic-co-glycolic acid) (PLGA) Nanofiber Bundles Prepared by Airflow
Summary
Electrospinning has been recognized as the best simple and efficient technique for the production of polymer nanofibers. The airflow bubble-spinning method [17,18] is used in this paper, which utilizes an external airflow with a certain temperature and speed for the surface tension of the film, polymer, and melt bubbles This is different from the electric field force in bubble electrospinning. These studies clearly demonstrate that CNTs can be used as one of the most promising nanofibers to mimic the extracellular matrix In this development process, Liu and her team successfully incorporated multi-walled carbon nanoparticles into polymers for electrospinning. The composite nanofibers were expected to have superior mechanical properties when compared to the pure PLGA nanofibers These PLGA or PLGA/MWCNT composite nanofibers were characterized by using scanning electron microscopy (SEM), thermogravimetric analyzer (TGA), X-ray diffraction (XRD) and Fourier-transform infrared. For the development of adsorption and filtration materials in the future
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
