Preparation of platinum electrocatalysts using carbon supports for oxygen reduction at a gas-diffusion electrode

Abstract

Platinum on carbon is the most popular electrocatalyst for oxygen reduction in acid fuel cells. In this study electrocatalysts based on six types of carbon substrate are prepared according to American Society for Testing and Materials (ASTM) standards. The electrocatalysts are made either by a direct method, in which sodium formate is used as a reducing agent, or by an indirect method, in which PtO 2/C is treated under four different conditions. A platinum loading of 0.5 mg cm −2 is used in all cases. The effects of the type of carbon support and the method of preparation of the electrocatalyst are investigated by electrochemical techniques, X-ray diffraction, scanning electron microscopy and N 2 adsorption. The combination of substrate type and preparation procedure that gives electrodes with the best performance is direct reduction using sodium formate as a reductant and sample N339 as a carbon substrate. For this optimum electrocatalyst, the symmetry factor and exchange current density are 0.5279 and 95.6 mA cm −2 in the rate-determining step, respectively.