Preparation of plastic fats with zero trans FA from palm oil

Abstract

AbstractA series of plastic fats containing no trans FA and having varying melting or plastic ranges, suitable for use in bakery, margarines, and for cooking purposes as vanaspati, were prepared from palm oil. The process of fractionating palm oil under different conditions by dry and solvent fractionation processes produced stearins of different yields. Melting characteristics of stearin fractions varied depending on the yield and the process. The lower‐yield stearins were harder and had a wider plastic range than those of higher yields. The fractions with yields of about 35% had melting profiles similar to those of commercial vanaspati. The plastic range of palm stearins was further improved by blending them with corresponding oleins and with other vegetable oils. The plasticity or solid fat content varied depending on the proportion of stearin. Blends with higher proportions of stearins were harder than those with lower proportions. the melting profiles of some blends, especially those containing 40–60% stearin of about 25% yield and 40–60% corresponding oleins or mahua or rice bran oils, were similar to those of commercial vanaspati and bakery shortenings. These formulations did not contain any trans FA, unlike those of commercial hydrogenated fats. Thus, by fractionation and blending, plastic fats with no trans acids could be prepared for different purposes to replace hydrogenated fats, and palm oil could be utilized to the maximum extent.