Preparation of Highly Exfoliated Epoxy/Clay Nanocomposites by “Slurry Compounding”: Process and Mechanisms

Abstract

Epoxy/clay nanocomposites with a high degree of exfoliation were achieved using a so-called "slurry-compounding" process with which the dispersed state of clay in water can be successfully transferred to an epoxy matrix. In this process sodium montmorillonite was first exfoliated and suspended in water. This suspension was further treated with acetone to form a clay-acetone slurry followed by chemical modification using silane. The modified slurry was then mixed extensively with epoxy to form epoxy/nanoclay composites. It has been shown that the morphologies of clay before and after curing are quite similar and the exfoliation process is termed "slurry compounding". Furthermore, the amount of organic modifier used is only 5 wt % of clay, in contrast to conventional organoclays which normally contain at least 25-45 wt % of organic surfactant. The resulting epoxy/nanoclay composites exhibit a high degree of clay exfoliation and a better thermal mechanical property.