Abstract
The Hummers method is the most commonly used method to prepare graphene oxide (GO). However, many waste acids remain in the raw reaction mixture after the completion of this reaction. The aim of this study was to reuse these waste acids efficiently. In this study, microcrystalline cellulose (MCC) was directly dissolved in the mixture after the high-temperature reaction of the Hummers method. The residual acid was used to hydrolyze MCC, and the graphene oxide/microcrystalline cellulose (GO/MCC) composites were prepared, while the acid was reused. The effects of MCC addition (0.5 g, 1.0 g, and 1.5 g in 20 mL) on the properties of the composites were discussed. The structure, composition, thermal stability, and hydrophobicity of GO/MCC composites were characterized and tested by SEM, XRD, FTIR, TG, and contact angle tests. The results showed that MCC could be acid hydrolyzed into micron and nano-scale cellulose by using the strong acidity of waste liquid after GO preparation, and it interacted with the prepared GO to form GO/MCC composites. When the addition amount of MCC was 1 g, the thermal stability of the composite was the highest due to the interaction between acid-hydrolyzed MCC and GO sheets. At the same time, the hydrophobic property of the GO/MCC composite is better than that of the GO film. The freeze-dried GO/MCC composites are more easily dispersed in water and have stronger stability.
Highlights
As an important oxygen-containing derivative of graphene, graphene oxide (GO) has the advantages of low production cost, large-scale production, and easy processing [1,2]
When GO is put into laboratory preparation and industrial production, the Hummers method is generally used as the preparation method of GO
Since all the preparation processes need strong acid to treat graphite, acid residue is still a problem to be solved. We find it inevitable to use strong acids in the preparation of GO
Summary
As an important oxygen-containing derivative of graphene, graphene oxide (GO) has the advantages of low production cost, large-scale production, and easy processing [1,2]. Relatively mature GO preparation methods are mainly divided into the Brodie method, Staudenmaier method, and Hummers method [15,16,17] Their preparation process is to first mix graphite with inorganic strong protonic acid (such as concentrated sulfuric acid, fuming nitric acid, or their mixture) in a certain proportion, so that small molecules of strong acid are inserted into the graphite layer. The high-value utilization of residual acid, reducing the waste of raw materials and avoiding its impact on the environment, will become a new research starting point. This can save the time consumed by centrifugation and dialysis during GO preparation
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.