Preparation of fibre-reinforced PLA-collagen@PLA-PCL@PCL-gelatin three-layer vascular graft by EDC/NHS cross-linking and its performance study

Abstract

In this study, a three-layer small diameter artificial vascular graft with a structure similar to that of natural blood vessels was first constructed by triple-step electrospinning technology, in which polylactic acid (PLA) and collagen (COL) were used for the inner layer, polylactic acid and polycaprolactone (PCL) was used for the middle layer and polycaprolactone and gelatin was used for the outer layer. The properties of the artificial vascular graft were adjusted by the EDC/NHS cross-linking agent through the reaction between the collagen or gelatine and EDC/NHS. The mechanical and hydrophilic properties of the cross-linked artificial vessels were substantially enhanced, with a maximum stress of 9.56 MPa in the axial direction and 9.31 MPa in the radial direction for the P/C (4:1) vascular graft, which exceeded that of many textile-based and natural vascular grafts. The increased hydrophilicity of the inner layer of the vessel before crosslinking was due to the addition of COL, and the inner layer of the artificial vessel after crosslinking had a substantial increase in hydrophilicity due to the production of a more hydrophilic urea derivative. The increased hydrophilicity led to easier cell adhesion to the inner layer of the artificial vessel, especially for the P/C (2:1) vascular graft, where the cell proliferation rate and adhesion were high due to COL incorporation and cross-linking. The three-layer vascular grafts studied did not lead to haemolysis. Therefore, the EDC/NHS cross-linked three-layer vascular graft had good mechanical properties, hydrophilicity, anticoagulation and could enhance cell adhesion and proliferation.