Preparation of Fe‐based magnetic‐core‐supported Co and Ni catalyst: application in viscosity reduction of heavy oil hydrocracking

Abstract

AbstractBACKGROUNDHeavy oil has the characteristics of high viscosity and low American Petroleum Institute gravity, which makes it difficult to transport and produce. The key to efficiently utilizing heavy oil is reducing viscosity and improving quality. Hydroconversion has the advantages of viscosity reduction and decreased coke production, but it is difficult to separate nonmagnetic catalysts from the reaction system, which affects the industrial application.RESULTSA spherical Fe3O4 (74.71 emu g−1) and a chain FeFe2O3 (110 emu g−1) were prepared as magnetic cores, and coated with SiO2 and Al2O3 layers, respectively. The metal‐supported catalyst modified with Co and Ni show irregular and honeycomb‐shaped surfaces, and the magnetic saturation strength decreases to 24.91 and 14.63 emu g−1, but still possessing superparamagnetic properties, enabling the catalysts to be separated from the reaction mixture. Fe‐Fe2O3@SiO2@Al2O3@CoNi catalyst has the best viscosity reduction effect for Canadian oil sands asphalt residue at about 410 °C and 10 MPa hydrogen pressure. The viscosity of the liquid product decreased significantly from 56 600 to 135 mPa s at 50 °C, with a viscosity reduction of 99.8%.CONCLUSIONMagnetic catalyst prepared from chain‐like Fe‐Fe2O3 has an excellent honeycomb structure, which can provide increased active surfaces and exhibit improved viscosity reduction performance. This work provides a strategy for the recovery of heavy oil hydrogenation catalysts and is expected to play a key role in the practical application of heavy oil hydrogenation catalytic viscosity reduction. © 2023 Society of Chemical Industry.