Preparation of cellulose nanocrystals from commercial dissolving pulp using an engineered cellulase system

Abstract

There is increasing attention to the production of cellulose nanocrystals (CNCs) from lignocellulosic biomass by enzymatic hydrolysis with cellulase. In this study, the feasibility of the application of a cellulase system from engineered strain Penicillium oxalicum cEES in the production of CNCs was assessed. Using commercial eucalyptus dissolving pulp (EDP) as substrate, the CNCs were successfully obtained by enzymatic hydrolysis with the cellulase cEES, and the total yields of CNCs reached 15.7% through three-step enzymatic hydrolysis of total 72 h (24 h for each step). The prepared CNCs were characterized and found that their crystallinity and thermal stability were higher than that of EDP. In the later stage of enzymatic hydrolysis, the process efficiency of enzymatic preparation of CNCs greatly decreased because of the high crystallinity of cellulosic substrate, and a simple homogenization treatment can promote the enzymatic hydrolysis, as well as produce fusiform CNCs with more uniform size and more fermentable sugar that could be further converted into fuels and bulk chemicals through fermentation. This study provides a feasible enzymatic preparation process for CNCs with engineered cellulase and commercial cellulosic materials.Graphical