Abstract
Powder metallurgy was used to fabricate a bulk ultrafine grain size (UFG) Mg-3Al-Zn alloys. Nanocrystalline alloy powders with an average grain size of 45 nm were synthesized via ball milling of elemental powders of Mg, Al and Zn. The milled powders canned in Al containers were subjected to cold (at room temperature) or hot press (for 40 min at 633K), respectively, in a vacuum furnace. The sintered samples were extruded at 423 K to further solidify. The results show that the average grain size is 180 nm for the cold samples, and that is 600 nm for the hot samples. The cold-press alloys show a yield stress of 426 MPa. The high strength of UFG Mg is attributed to the fine grain strengthening mechanism resulting from the strong dependence of strength on the grain size for HCP metals. The consolidated samples of the cold-press and hot-press alloys have a final density of (1.777±0.006) and (1.800±0.006) g/cm 3, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Transactions of Nonferrous Metals Society of China
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.