Abstract

The majority of biodiesel fuels are produced from vegetable oils or animal fats by transesterification of oil with alcohol in the presence of a catalyst. In this study, a new class of biofuel is explored by acetylation of fatty alcohols from Jojoba oil. Jojobyl methyl acetate (JMA) was produced using direct acetylation of purified jojobyl alcohol obtained during preparation of Jojobyl methyl esters (JME). Important fuel properties of JMA, such as kinematic viscosity, cloud point (CP), pour point (PP), cold filter plugging point (CFPP), acid value, oxidative stability, gross heat of combustion, and lubricity were evaluated using standard methods. A comparison was made with previously reported JME and relevant biodiesel fuel standards, such as ASTM D6751 and EN 14214. The CP, CFPP, and PP values of JMA were 2, −10, and −16 °C, respectively. These results were comparable to JME with the exception of a higher CP in the case of JMA. The kinematic viscosity (40 °C) of JMA was 7.64 mm2/s, which was higher than t...

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.