Preparation of amphiphilic Janus nanosheets based on thermally expandable microspheres and evaluation of their physical and chemical properties

Abstract

Janus nanosheets can reduce the interfacial tension of oil and water and are of great significance for improving the recovery efficiency of remaining oil. A novel strategy for preparing amphiphilic Janus nanosheets is presented in this paper. Trialkoxysilane is adsorbed on the surface of thermally expandable microspheres (TEMS), and Janus spheres (TEMS@SiO2) are obtained by sol-gel treatment. Dodecyltrimethoxysilane (DTES) is used to modify TEMS@SiO2, which is combined with the thermal expansion of TEMS and the breaking of the outer shell of Janus spheres to prepare amino/alkyl composite silicon-based amphiphilic Janus nanosheets (ASAJN). Characterization of ASAJN is carried out via FTIR, TG, SEM, TEM, and contact angle tester, with the results showing that ASAJN boasts amphiphilicity and two-sidedness, and a sheet structure with a thickness of 210 nm. The stability, wettability evaluation, emulsification properties, and interface properties of ASAJN nanofluids have been evaluated, with the results showing that ASAJN nanofluids boast good stability without delamination after 30 days. ASAJN nanofluid can convert oil-wet core slices into water-wettable ones. ASAJN nanofluid manifests excellent emulsification, with the 240-hour emulsification index of ASAJN nanofluid and silica fluid respectively at0.40 and 0.021 under ultra-low concentration (1000 mg/L). ASAJN is obviously able to reduce oil–water interfacial tension. At 1000 mg/L (60 ℃) concentration, the oil-water interfacial tension is reduced to 2.6 mN/m, while that of nano-silica at the same concentration is 15.1 mN/m. ASAJN flooding can significantly improve the recovery efficiency of low-permeability reservoirs, increasing the recovery efficiency by 32.8 % at a permeability of 7.5 × 10-3 μm2.