Abstract
A novel nitrogen-containing graphitic mesoporous carbon was prepared through MnO-templated method using polyacrylonitrile (PAN) as both carbon and nitrogen sources, and MnCO3 as both template and catalyst precursors. The effects of preparation conditions on the physicochemical properties of obtained samples were systematically investigated. The results showed that as the decrease of the weight ratios of PAN and MnO (2:1–1:4), the increase of carbonization temperature (700–900 °C) and pre-oxidation temperature (180–200 °C), the samples had higher specific surface area, mesopores volume and ratios, up to 507 m2/g, 0.824 cm3/g and 96.83%, respectively. Moreover, the prepared samples presented relatively high graphitic degree and nitrogen contents (~2.21%). The adsorption capacity for acid red 88 (AR88) was as high as 309 mg/g, which were dramatically affected by the mesoporous properties and C- and N-containing groups on the surface of prepared carbon. The rich graphic carbon and pyridine-N in mesoporous carbon generated π-π dispersion and electrostatic interaction with AR88, respectively, which jointly were responsible for the adsorption process. The results of the isotherm and kinetic studies indicated that the AR88 adsorption on mesoporous carbon could be well depicted using Langmuir model and pseudo-2nd-order model.
Highlights
A novel nitrogen-containing graphitic mesoporous carbon was prepared through MnO-templated method using polyacrylonitrile (PAN) as both carbon and nitrogen sources, and MnCO3 as both template and catalyst precursors
Few studies have been conducted on using manganese salts as both template and catalyst precursors for the preparation of graphitic mesoporous carbon
In this study, a novel nitrogen-containing graphitic mesoporous carbon was prepared by MnO-template method using PAN as both carbon and nitrogen sources, together with commercial MnCO3 as both template and catalyst precursors
Summary
A novel nitrogen-containing graphitic mesoporous carbon was prepared through MnO-templated method using polyacrylonitrile (PAN) as both carbon and nitrogen sources, and MnCO3 as both template and catalyst precursors. As shown in TG analysis (Fig. 1), the existence of MnO could promote the decomposition of PAN during 480 to 1000 °C, which could result in the difference on carbon structure between the samples with and without MnCO3.
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
