Abstract

Transforming waste resources into energy storage materials is a new way to convert them into value-added products and help solve the problems of energy shortage and environmental pollution. A nitrogen-phosphorus co-doped activated carbon was synthesized from waste cotton fabric by combining carbonization and activation in ammonium polyphosphate and a molten salt system (ZnCl2 and KCl with a molar ratio of 52:48). The morphology, microstructure and composition of the activated carbon were characterized by SEM, nitrogen adsorption, Raman spectroscopy and XPS. Cyclic voltammetry and galvanostatic charge/discharge were used to test the supercapacitor performance of the activated carbon. Results show that the co-doped activated carbon had a specific surface area of 751 m2 g−1, a specific capacitance of 423 F g−1 at a current density of 0.25 A g−1, and a capacitance retention rate of 88.9% after 5000 cycles at a current density of 5 A g−1. The energy density was 28.67 Wh kg−1 at a power density of 200 W kg−1 for a symmetrical supercapacitor using the activated carbon.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.