Preparation of a cationic hydrogel microsphere adsorbent for efficient removal of hexavalent chromium from aqueous solution

Abstract

AbstractHerein, a cationic hydrogel microsphere (CHMS) was prepared by inverse suspension polymerization and freeze‐drying and was applied to the adsorptive removal of hexavalent chromium (Cr(VI)) from aqueous solution. Morphological characterization shows that there are lots of folds and pores on the surface of CHMS with a unique petal‐like appearance. According to the chemical structure analysis, CHMS contains plenty of functional groups such as amine and hydroxyl groups. These features give CHMS a larger specific surface area, faster adsorption rate, and higher adsorption capacity than the conventional cationic hydrogel microparticle (CHMP) adsorbent. The adsorption of Cr(VI) in water by CHMS is mainly based on the combination of electrostatic adsorption and redox reaction, with the electrostatic interaction between the protonated amine and Cr(VI) serving as the predominant adsorption mechanism. Experimental results reveal that CHMS can efficiently remove Cr(VI) from simulated wastewater in both batch and continuous adsorption modes, which is primarily due to its distinctive surface morphology and rich functional groups. Furthermore, the common coexisting metal ions in Cr(VI)‐containing wastewater have no substantial negative influence on the adsorption. Therefore, it can be concluded that CHMS has a promising application prospect in the treatment of Cr(VI)‐containing wastewater.