Abstract
Absolute AMS (accelerator mass spectrometry) measurements require reliable standards for calibration. Highly concentrated 26Al was obtained from NBS (National Bureau of Standards). The 26Al, SRM 4229, was sequentially diluted with natural Al and 26Al AMS standards were prepared. These 26Al AMS standards are widely used as primary standards at major AMS laboratories. A substantial amount of 26Al AMS standards with 26Al/Al ratios of 7.444×10−11, 3.096×10−11, 1.065×10−11, 4.694×10−12, 1.818×10−12 and 4.99×10−13 are now available for the AMS community. Solutions having 26Al/Al ratios between 10−12 and 10−10 were measured by several AMS laboratories; excellent linearity was obtained within the range of 5×10−13–1×10−1026Al/Al.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.