Preparation, mechanical properties and in vitro cytocompatibility of multi-walled carbon nanotubes/poly(etheretherketone) nanocomposites

Abstract

Desired bone repair material must have excellent biocompatibility and high bioactivity. Moreover, mechanical properties of biomaterial should be equivalent to those of human bones. For developing an alternative biocomposite for load-bearing orthopedic application, combination of bioactive fillers with polymer matrix is a feasible approach. In this study, a series of multi-walled carbon nanotubes (MWCNTs)/poly(etheretherketone) (PEEK) bioactive nanocomposites were prepared by a novel coprecipitation-compounding and injection-molding process. Scanning electron microscope (SEM) images revealed that MWCNTs were adsorbed on the surface of PEEK particles during the coprecipitation-compounding process and dispersed homogeneously in the nanocomposite because the conjugated PEEK polymers stabilized MWCNTs by forming strong π–π stack interactions. The mechanical testing revealed that mechanical performance of PEEK was significantly improved by adding MWCNTs (2–8 wt%) and the experimental values obtained were close to or higher than that of human cortical bone. In addition, incorporation of MWCNTs into PEEK matrix also enhanced the roughness and hydrophilicity of the nanocomposite surface. In vitro cytocompatibility tests demonstrated that the MWCNTs/PEEK nanocomposite was in favor of cell adhesion and proliferation of MC3T3-E1 osteoblast cells, exhibiting excellent cytocompatibility and biocompatibility. Thus, this MWCNTs/PEEK nanocomposite may be used as a promising bone repair material in orthopedic implants application.