Preparation, characterization and application of a composite bioflocculant.

Abstract

Composite flocculant PAFS-PDM was prepared from Polymeric aluminium ferric sulphate (PAFS) and Poly (diallyl dimethyl ammonium chloride) (PDM) in this study. A bacterium was selected from the soil near the shale gas exploitation platform as a bioflocculant-producing bacterium, and polysaccharide was extracted and combined with PAFS-PDM to obtain composite bioflocculant (CBF) to treat shale gas fracturing flowback fluid. The prepared CBF was characterized and the results showed that the prepared PAFS-PDM contained aluminium-iron hydroxyl polymer, which was a cationic flocculant. By measuring the turbidity removal rate and chemical oxygen demand (COD) removal efficiency, the function mechanism of CBF on the shale gas fracturing flowback fluid was discussed. The results showed that CBF had a stable treatment effect on fracturing flowback fluid when the pH value was about 7.0. With the increase of dosage, the coagulation efficiency increased first and then decreased. When the dosage of the CBF was 2500 mg·L-1, the treatment effect of shale gas fracturing flowback fluid was the best, and COD removal rate reached 89.43%. Through Zeta potential analysis, it was concluded that one of the coagulation mechanisms was electrical neutralization. According to the characterization results, it could be concluded that both adsorption bridging and charge neutralization mechanisms played important roles in the treatment of shale gas fracturing flowback fluids.