Abstract
A polyacrylonitrile (PAN)-based carbon fiber–silicon carbide core–shell hybrid (SiC/PAN-CF) was prepared by carbothermal reduction of SiO2/PAN-CF, which was obtained by dip coating a SiO2 sol on the surface of PAN-CF. The surface of the PAN-CF was uniformly covered with the SiC, and the decomposition temperature of SiC/PAN-CF was higher than that of the uncoated PAN-CF. In addition, the thermal conductivity of epoxy composites consisting of PAN-CF or SiC/PAN-CF was measured using a laser flash method. At a 80wt% filler loading, the thermal conductivity of SiC/PAN-CF-epoxy composite was found to be 0.750W/mK, which is 2 times higher than that of the PAN-CF-epoxy composite and approximately 3.5 times greater than that of unmodified epoxy resin. Furthermore, the thermal conductivity of SiC/PAN-CF-epoxy composite increased with increasing carbothermal reduction time. This increased thermal conductivity is due to improving the specific surface area and wettability with epoxy matrix, thus resulting in an improved the interfacial adhesion with epoxy matrix.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
