Preparation and thermal physical properties of MgO-(Nd1-xYx)2(Zr1-xCex)2O7 composite ceramics as a candidate for inert matrix fuel

Abstract

In recent years, the MgO-Nd2Zr2O7 composite ceramics inert matrix (IM) was proposed as a candidate for the transmutation of Pu and minor actinides (MA) in light water reactors (LWR) or accelerator driven sub-critical system (ADS). To take full advantage of the pyrochlore structure of Nd2Zr2O7 to accommodate different types of MA and Pu, in this work, Y and Ce co-doped ωMgO-(1-ω)(Nd1-xYx)2(Zr1-xCex)2O7 (M-NYZC) composite ceramics used as a candidate IM for inert matrix fuel were prepared by solid-state one-step sintering method at 1500 °C for 3 h. The phase structure and microstructure of M-NYZC composite ceramics were characterized by XRD and SEM-EDS. Also, the thermal physical properties of M-NYZC composite ceramics including the thermal expansion coefficient and thermal conductivity were investigated systematically. Results from XRD and SEM-EDS showed that the magnesium oxide and NYZC pyrochlore solid solution are intermixed well with each other, and the M-NYZC samples present uniform element distribution with a grain size of about 1 μm. Also, the as-prepared samples possessed well densified microstructure, and the average relative density of all samples could exceed 95 %. Moreover, the thermal expansion coefficient and thermal conductivity of 0.5M-0.5NYZC (x = 0, 0.15, 0.2, 0.5, 0.9) samples were located in the range of 13.4 × 10-6–14.4 × 10-6 K-1 and 16.34–3.70 W·m-1·K-1 respectively. By comparison, the thermal physical properties of 0.5M-0.5NYZC samples are superior to that of traditional UO2 and MOX fuels. It is suggested that the M-NYZC composite ceramics prepared in this study can meet the thermal physical performances of inert matrix fuel.