Abstract
The three-dimensional porous structure PbO2 electrodes (3D-PbO2 electrodes) were prepared in the lead nitrate solution by potentiostatically electrodeposition method using oxygen bubble as dynamic template, which can be used as the positive materials of the supercapacitors. The morphology and structure of 3D-PbO2 electrodes were characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD). The supercapacitive performance of 3D-PbO2 electrodes were investigated by cyclic voltammetry (CV), galvanostatic charge-discharge tests (GCD) and electrochemical impedance spectroscopy (EIS). The specific capacitance of 3D-PbO2 electrodes can reach 195.6 F g–1 at 0.2 A g–1, which is 2.8 times higher than that of Flat-PbO2 electrodes (68.8 F g–1). The charge transfer resistance (Rct) of 3D-PbO2 electrodes (8.21 Ohm cm–2) is lower than that of Flat-PbO2 electrodes (21.32 Ohm cm–2). The excellent supercapacitive performance of 3D-PbO2 electrodes can be attributed to the three-dimensional porous structure, which can enlarge the active surface area of lead dioxide electrodes and promote the electrolyte diffusion and electrons propagation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.