Abstract
AbstractWaterborne polyurethanes were prepared by polyaddition reaction using isophorone diisocyanate, dimethylol propionic acid, various polyols with a fixed molecular weight (Mn = about 2000), ethylene diamine as a chain extender, and triethylamine as a neutralization agent. Three types of polyols such as (1) solo glycols [polypropylene glycol (PPG) (Mn = 2000), poly(tetramethylene oxide) glycol (PTMG) (Mn = 2000), poly(tetramethylene adipate glycol) (PTAd) (Mn = 2000), or polycaprolactone glycol (PCL) (Mn = 2000)], (2) the polyol blends (PPG/PCL, PTMG/PCL, PPG/PTAd, PTMG/PTAd), and (3) a triblock glycol (TBG) (Mn = 1990) were used in this study. The triblock glycol (TBG) [(CL)4.5–PTMG (Mn = 1000)–(CL)4.5 (Mn =1990] was synthesized from PTMG and ϵ‐caprolactone (CL) in this study. The triblock glycol was found to have two main melting peaks at about 13 and 40°C. This study was examined on the effect of the types of polyols on the particle size, viscosity, dynamic thermal properties, and water vapor permeability. The particle size of the aqueous polyurethane–urea dispersion increased in the order of polyol‐blends‐based samples (183–350 nm) > TBG‐based sample (167 nm) > solo‐polyol‐based sample (58–96 nm). By dynamic thermal mechanical analysis, the ester‐type polyol‐ (PTAd and PCL) based samples were found to have higher storage modulus and Tg than those of ether‐type polyol‐ (PPG and PTMG) based samples. The water vapor permeability (WVP) increased in the order of TGB‐based sample > PCL/PTMG‐based sample > PTAd/PTMG‐based sample > PCL/PPG‐based sample > PTAd/PPG‐based sample > PTMG‐based sample > PPG‐based sample > PCL‐based sample > PTAd‐based sample. WVP was found to increase in the order of TBG‐based sample > polyol‐blend based samples > solo‐polyol‐based samples. It was also found that the samples containing ether‐type glycols (PTMG, PPG) had higher permeability than samples having ester‐type glycols (PCL, PTAd). PTMG‐based samples were found to have higher permeability than PPG‐based samples if other compositions were constant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 123–129, 2003
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
