Abstract
To meet the demand for the bone fracture internal fixation, hydroxyapatite/chitosan (HA/CS) nanocomposite rods were reinforced via a covalently crosslinking method. The bending strength and bending modulus of the crosslinked HA/CS (5/100, wt/wt) rods could arrive at 178 MPa and 5.2 GPa, respectively, increased by 107% and 52.9% compared with uncrosslinked HA/CS (5/100, wt/wt) rods. XRD analysis indicated that the crystallinity of CS decreased after the network structure formed. CS crystal plane space (d) became smaller after crosslinking, but HA nanoparticles could prevent the decrease of d. HA nanoparticles (100 nm in length, 20–30 nm in width) were uniformly dispersed in a CS matrix. Increasing the content of HA, the acicular morphology of HA particles became vague, but crosslinking could make the acicular morphology clear over again, because the size of HA nanoparticles became smaller after crosslinking. A microstructure was observed by SEM, indicating that a layer-by-layer structure of the composite rods became much tighter through crosslinking, and the cracks turned around when they reached another layer to absorb energy. Consequently, HA/CS nanocomposite rods with high mechanical performance should be one novel device used for internal fixation of bone fracture.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
