Preparation and properties of phosphogypsum-based calcined coal gangue composite cementitious materials

Abstract

Phosphogypsum (PG) and coal gangue (CG), as the largest solid waste today, the effective utilization of this part of the resource can help to alleviate environmental pollution and resource waste. The aim of this study was to utilize the excellent thermal insulation properties of original PG and the regulation of hydration products by calcined coal gangue (CCG) to produce phosphogypsum-based calcined coal gangue composite cementitious materials (PBCM). The optimal ratio of PBCM was studied through a combination of mechanical properties and thermal insulation properties. Finally, the effect of the foam factor is further investigated. The results show that: CCG can be used as a silicon-rich material with gelling properties to regulate the hydration products generated. The test block with a foam content of 8% has the best performance, with a compressive strength of 2.53MPa and a thermal conductivity of 0.1427W/(m·K). The optimal experimental scheme obtained from the orthogonal test was as follows: The optimal experimental design obtained from orthogonal experiments was as follows: PG, quicklime (QL), sulfoaluminate cement (SAC) and foam contents were 45%, 8%, 8% and 8%, respectively. The CCG: cement and water-solid ratios (W/S) were 3:7 and 0.275, respectively. The development of high-performance composites presented in this study is conducive to enhancing waste utilization and provides a novel approach as well as a theoretical foundation for insulating building materials in practical engineering applications.