Preparation and properties of high-performance polyimide copolymer fibers containing rigid pyrimidine and benzoxazole moieties with hydrogen bonding

Abstract

The utilization of 5-amino-2-(2′-hydroxy-4′-aminophenyl)-benzoxazole (HBOA) as third monomer was beneficial for the introduction of OH-type H-bonding into polyimide (PI) matrix through the copolymerization with 2,5-bis(4-aminophenyl)pyrimidine (PRM) and 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA). And high-performance PI fibers were successfully fabricated via the dry-jet wet spinning process. The FTIR spectra confirmed that the strong interactions of intramolecular and intermolecular H-bonding existed simultaneously in PI fibers. Moreover, the glass transition temperatures (Tg) of all fibers were within 276–318 °C, and the temperatures at 5% weight loss (T5%) ranged from 574 °C to 604 °C, revealing the remarkable thermal stability of PI fibers. The two-dimensional wide-angle X-ray diffraction (2D WAXD) results illustrated a U-shaped change in the crystallinity (from 32.1% to 12.2% until 33.4%) of PI fibers with increasing HBOA content, which was also reflected in the density variation of fibers. The two-dimensional small-angle X-ray scattering (2D SAXS) patterns demonstrated that the micro-defects in all co-PI fibers profitably decreased in comparison with those in homo-PI fibers. Furthermore, the orientation factor of fibers presented an improvement from 0.843 to 0.899 after incorporating HBOA moiety. When the molar ratio of PRM/HBOA was 7/3, the co-PI fiber exhibited optimum mechanical properties with tensile strength and modulus as high as 4.15 GPa and 125.93 GPa, respectively. Interestingly, the variation in fiber orientation was in line with the same trend as that of mechanical properties of PI fibers, indicating orientation was also a crucial factor to improve the mechanical properties. The relationship between structure and mechanical property was also investigated.