Abstract
In this study, a novel nucleating agent composed of graphene oxide (GO) and silicon dioxide (SiO2) (GO–SiO2) is developed. GO is used as a skeleton material through which SiO2 nanomaterials are absorbed and subsequently incorporated into Na2SO4·10H2O phase change materials (PCMs). Furthermore, this study examines the phase change performance of the composite Na2SO4·10H2O materials. Fourier-transform infrared (FTIR) spectra confirmed the physical combination of GO with a SiO2 nanoparticles. Scanning electron microscope (SEM) results showed that the GO–SiO2 composite exhibited a layered structure and excellent dispersibility. The GO–SiO2 composite Na2SO4·10H2O PCMs displayed a low level of supercooling, i.e., about 1.2 °C with the addition of GO–SiO2 at 2.45 wt%. This was because the synergistic relation of the GO and the high dispersion SiO2, imparted more nucleation sites for Na2SO4·10H2O. Additionally, the prepared PCMs achieved high phase change latent heat and thermal conductivity, even under these conditions. The results show that the GO–SiO2 in the Na2SO4·10H2O exhibited advantageous application prospects for the improvement of the thermal performance of hydrate salts.
Highlights
Phase change materials (PCMs) are a kind of thermal energy storage material that can provide a high density of heat storage within a small temperature range, i.e., nearly that of the phase change temperature
Inorganic hydrate salts are a kind of PCM that feature characteristics including high phase change latent heat, nonflammability, low cost and high thermal conductivity [3,4]
There are problems with inorganic hydrate salts, notably their phase separation and level of supercooling, which have become the key issues restricting the application of these kinds of materials [7,8]
Summary
Phase change materials (PCMs) are a kind of thermal energy storage material that can provide a high density of heat storage within a small temperature range, i.e., nearly that of the phase change temperature. This characteristic of PCMs makes them suitable for a wide range of applications in solar energy production, building energy conservation, refrigeration logistics, power systems, waste heat recovery, heating and air conditioning, household appliances and so on [1,2]. Inorganic hydrate salts are a kind of PCM that feature characteristics including high phase change latent heat, nonflammability, low cost and high thermal conductivity [3,4]. There are problems with inorganic hydrate salts, notably their phase separation and level of supercooling, which have become the key issues restricting the application of these kinds of materials [7,8].
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
