Preparation and Performance of Mo/Cu/Fe Multi-Layer Composite Coating with Staggered Spatial Structure by Electro-Explosive Spraying Technology.

Abstract

In the present study, electro-explosive spraying technology was used to prepare a multi-layer composite coating with a staggered spatial structure on a 45 steel substrate, and the mechanical properties and wear behavior of the coating were studied. The composite coating was prepared by spraying Mo as the bonding layer, then spraying high-carbon steel and aluminum bronze alternately as a functional coating. The cross-sectional morphology, surface morphology and the properties of the coating were analyzed with a scanning electron microscope (SEM), energy dispersive spectrometer (EDS), electron backscattered diffraction (EBSD) and a 3D profilometer. The bonding strength, friction and wear resistance of the coating were studied by the bonding strength experiment and by the friction and wear experiment. The results showed that it is feasible to prepare a composite coating with a sponge-like spatial structure with electro-explosive technology. There was metallurgical bonding as well as mechanical bonding between the adjacent coating layers. The composite coating had the advantages of uniform thickness, high compactness, high bonding strength and good wear resistance.