Preparation and performance evaluation of intelligent plugging agent for thermo‐sensitive water‐based drilling fluid

Abstract

AbstractIn the process of unconventional oil and gas exploitation, the invasion of a large amount of drilling fluid into the formation is one of the most critical reasons leading to wellbore instability. A temperature‐sensitive polymer (AOS) was synthesized from acrylamide, oligo (ethylene glycol) methyl ether methacrylate (OEGMA), and sodium p‐styrene sulfonate by emulsion polymerization. The material is a solid‐free fluid with good fluidity at room temperature, after injection into the formation, the fluid is gradually transformed into hard gel above the lower critical solution temperature (LCST) (90°C), thus blocking micro‐fractures and improving wellbore stability. Infrared and NMR characterization confirmed the successful preparation of the target product. The transmittance of AOS with ambient temperature was measured by UV–vis spectrophotometer, and the LCST behavior of AOS was verified by rheological and viscoelastic measurements. The interaction mechanism between AOS and sodium bentonite was evaluated according to the American Petroleum Institute standard. The results show that after aging at 180°C, the filtration loss is reduced by 93%, and the medium permeability (100, 200 mD) formation is effectively plugged, with a plugging efficiency is as high as 74.7%.