Preparation and oxidative desulfurization performances of modified SBA-15 supported polyacid metal oxolates

Abstract

In this study, eight composite catalysts were prepared by loading (CTAB)3H3[PW9V3O40] (active components) onto amino-functionalized mesoporous titanium silicate Ti-SBA-15(supports). In order to study the effects of different Ti contents and different active components on the catalytic performances of the catalysts, 30 %(CTAB)3H3[PW9V3O40]/NH2–Ti-SBA-X (X = 0, 25, 50, 75, 100) and X%(CTAB)3H3[PW9V3O40]/NH2–Ti-SBA-50 (X = 20, 40, 50) were obtained and characterized. The oxidative desulfurization performances of the composite catalysts were explored. It was found that catalyst 40 %(CTAB)3H3[PW9V3O40]/NH2–Ti-SBA-50 exhibits the optimal oxidative desulfurization performance. This is because the incorporation of SBA-15 with an appropriate amount of Ti (n(Si)/n(Ti) = 50) can improve the acidity and stability of mesoporous silica. The successful substitution of CTAB (n(CTAB)/n(H6PW9V3O40) = 3) in the active component can reduce the mass transfer resistance and speed up the reaction rate. 3-Aminopropyltriethyl silane (APTES) acts as a silane coupling agent to graft amino groups onto mesoporous molecular sieve SBA-15, which can enhance the interaction between heteropolyacids and carriers. Under the synergistic effect of the active component and the support, the total removal rate of the optimal catalyst with a total concentration of 1000 ppm sulfur compounds in the simulated fuel was 94.44 %. After four cycles, the total desulfurization rate of the catalyst can reach 91.28 %.