Preparation and optimization of freestanding GaN using low-temperature GaN layer

Abstract

In this work, a method to acquire freestanding GaN by using low temperature (LT)-GaN layer was put forward. To obtain porous structure and increase the crystallinity, LT-GaN layers were annealed at high temperature. The morphology of LT-GaN layers with different thickness and annealing temperature before and after annealing was analyzed. Comparison of GaN films using different LT-GaN layers was made to acquire optimal LT-GaN process. According to HRXRD and Raman results, GaN grown on 800 nm LT-GaN layer which was annealed at 1090 °C has good crystal quality and small stress. The GaN film was successfully separated from the substrate after cooling down. The self-separation mechanism of this method was discussed. Cross-sectional EBSD mapping measurements were carried out to investigate the effect of LT-buffer layer on improvement of crystal quality and stress relief. The optical property of the obtained freestanding GaN film was also determined by PL measurement.