Abstract
In this study, municipal solid waste incineration fly ash (MSWI FA) was used as a new raw material for the ceramics industry and a novel ultra-low thermal conductivity calcium silicate-based foams (CSFs) was prepared by the direct foaming method. The effects of the addition of foam and borax on the sintering behavior and microstructural evolution of the CSFs were investigated. With the optimal amount of foam, the CSFs had an apparent porosity of 63.43%–67.49%, bulk density of 0.75–0.84 g/cm3, compressive strength of 1.83–3.21 MPa, and room-temperature thermal conductivity of 0.213–0.235 W/(m·K). Notably, the whisker morphology, pore structure, and sintering behavior of the samples can be controlled by changing the amount of borax. The prepared ceramic foams can be applied in the fields of thermal insulation, filtration, and catalyst carriers.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
