Abstract
Novel exfoliated nanocomposites based on polyamide 6 (PA6)/CoAl layered double hydroxide (CoAl-LDH) have been successfully prepared via in situ polymerization. X-ray diffraction (XRD) and transmission electron microscopy (TEM) results indicated that the inorganic nanoplatelets of CoAl-LDH were homogeneously dispersed in the PA6 matrix. Mechanical testing (by tensile tests and nanoindentation measurements) shows that, compared with neat PA6, the tensile modulus, the yield strength, and the hardness of the nanocomposites are substantially improved by about 100%, 75%, and 25%, respectively, with incorporating only 1 wt% CoAl-LDH. In addition, tensile fracture morphologies of neat PA6 and its nanocomposites are also compared and discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.