Abstract
(x = 0.12) nanofibres have been successfully prepared by sol-gel method, electrospinning and subsequent heat treatment. The prepared nanofibres were characterised via X-ray diffraction (XRD), transmission electron micrograph (TEM) and superconducting quantum interference device (SQUID). The XRD revealed that the crystal structure of samples was hexagonal magnetoplumbite structure at calcination temperature from 900 °C to 1100 °C. The TEM showed that the ferrite nanofibres had a smooth morphology and a bamboo joint structure, and the diameter of nanofibres increased with the increase of sintering temperature. The SQUID revealed that there were some intriguing changes in magnetic properties with the variation of sintering temperature or altering calcination time, and the optimised magnetic property of samples was Ms 70.76 emu/g, Mr 36.35 emu/g and Hc 6.26 kOe at 950 °C for 2 h, the corresponding grain size was 39.30 nm. Meanwhile, the nanofibres display more significant improvements in the magnetic properties than the nanoparticles obtained by the sol-gel process, which was probably due to the anisotropic morphology and the cylindrical magnetic domain of ferrite nanofibres.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
