Abstract
The high emissivity coating was deposited by Air Plasma Spraying (APS). Ni2O3, Cr2O3 were the main raw materials in this study. The feedstock powder was prepared by spray drying and post-sintering at 1420 °C for 2hours. The microstructure, phase structure, flowability and bulk density of the plasma sprayed powder were characterized. The microstructure, bond strength and infrared emissivity of the high emissivity coating were also analyzed in this paper. The results reveal that the powder before and after sintering presents good flowability and is suitable for plasma spraying process. A dense coating with the bond strength of 28.14MPa was prepared successfully. The normal emissivity of the coating in all waveband is 0.87 at the temperature of 300°C, 600°C, 900°C, 1000°C, 1100°C and 1200°C
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
