Preparation and evaluation of polyester-cotton/wire blended conductive woven fabrics for electromagnetic shielding

Abstract

For the pursuit of conductive textiles with high electromagnetic shielding performance, specified yarns are processed with a special spinning feeding device with twist counts of 40 T, 50 T, 60 T, 70 T, 80 T, and 90 T, for Next, the optimal yarns from each group are made into SS/Pc-70 and Cu/Pc-80 conductive woven fabrics with a plain weave structure design. In addition, the surface resistivity, electromagnetic shielding effectiveness measurement and air permeability of the two conductive woven fabrics were tested and analyzed. Regarding the electromagnetic shielding performance test, the effects of the complete shielding network, the lamination layers of fabric, and lamination angle on the electromagnetic shielding performance are discussed. The test results indicate that Cu/Pc-80 woven fabrics has the lowest surface resistivity, which means it has the best electrical conductivity; Moreover, different types of metal wires provide the conductive fabrics with different levels of surface resistance. The variations in the lamination angles help attain a complete conductive network that significantly enhances the EMSE, and Cu/Pc-80 have a greater average shielding value comparatively and thus greater EMSE. For both types of conductive woven fabrics, one-layered conductive woven fabrics exhibit the maximal air permeability. As the air permeability of conductive woven fabrics is correlated with the thickness of fabrics, the greater the number of lamination layers, the lower the air permeability of the conductive fabrics.