Abstract
This paper is concerned with the preparation and characterization of transformer oil based nanofluids with the suspensions of Al2O3 and CuO nanoparticles . As a part of experimental study the transformer oil based nanofluids for heat exchangers in transformer cooling application, preparation and characterization has been performed. The preparation of nanofluids is the first key step in experimental studies with nanofluids. One step technique and two step technique are generally used for preparing the nanofluids. This work deals with the preparation methods of (Al2O3-Transformer oil ,CuO-Transformer oil) and characterizing the transformer oil based nanofluids of different volume concentrations (0.05%, 0.1%, 0. 5%, 1.0% and 1.5%).From the results it is revealed that increasing the volume concentration resulted in increase in thermal conductivity, viscosity of the nanofluid and decrease in density and specific heat of nanofluid.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.